QC-652B/C/D/E
Melt Flow Index Tester
QC-639V/W
Impact Tester Digital Type
QC-317F
Hydrostatic Head Tester - Digital Type
QC-548M1F-S
Universal Material Testing Machines
QC-548D2-S
Universal Material Testing Machines
Tape Holding Power Tester (Normal Type) QC-801D
QC-677T
Manual Hot Press
QC-621N Electronic Crock meter
QC-548M2F-S
Universal Material Testing Machines
QC-505M2F
Universal Testing Machine
QC-501M2F
Universal Testing Machine
QC-526D2-Extended
Digital type Materials Testing Machines
QT-010
Torque Tester - Manual Type
QC-958
Max.300kN
Computerized Hydraulic Universal Testing Machine
QC-954
Max.1000kN
Computerized Hydraulic Universal Testing Machine
QC-952
Max.2000kN
Computerized Hydraulic Universal Testing Machine
QC-956
Max.600kN
Computerized Hydraulic Universal Testing Machine
QC-41110
Torque Tester - Automatic Type
QC-41111
Torque Tester - Programmable Type
QC-116D
Automated Mullen Burst Tester
QC-528D3
Universal Testing Machine
Products
Material testing machine, impact testing machine, abrasion testing machine, melt index testing machine, torque test, heat deformation tester, thermos press forming machine, fatigue testing machine, related fixture and custom testing machine and other quality testing equipment. In addition, we also provides OEM service and control system R&D services.
FIND MORESolution
The products applicable to the industry include rubber and plastics, tapes, electronics, packaging, paper, metal, building materials and other industries.
ASTM D790, ISO 178
"Bending strength", also known as Bending Strength, is the maximum stress that can be withstood before the material is broken. The main purpose is to test the bending resistance of the material.
READ MORE
ASTM D882
When the film is stretched, it is easy to cause pre-damage of the test piece due to the lateral shear force generated by the clamp, resulting in a lower value than the actual one. Therefore, should be careful to the fixture selection.
READ MORE
ASTM D638
Plastic tensile strength test, analysis of plastic stress, elongation at break, elastic modulus and other physical properties, as a reference for industrial applications
READ MORE
ASTM D1238，ISO 1133
Checking the melting flow rate of the plastic, it can be judged whether the plastic is added to the secondary raw material or the recycled material, and the Melt Index is also an important reference data for injection molding.
READ MORE
ASTM D412
Vulcanized rubber has good ductility and toughness. It is used to analyzes the strength and breaking strength at various elongations. The test piece needs to be cut into a dumbbell shape and tested with an extensometer.
READ MORE
ASTM D642、TAPPI 804
Packing boxes such as cartons, wooden boxes, styrofoam boxes, etc., when the stack weight is too large, it is easy to cause deformation or box damage, so the box compression strength test is required.
READ MORE
ASTM D1000 ASTM D3330
Tape adhesion test, common 180 ° and 90 ° peel angle, analysis of the peak-to-valley value and average strength of the tape during the stripping process. Sample production has certain requirements and regulations, in order to achieve stable test results.
READ MORE
ASTM D256, ASTM D6110, ASTM E23 ,ISO180, ISO 148, EN10045-1, ISO 179, ISO13802
Using the single pendulum impact method, energy is applied to the test piece to measure the energy absorbed by the test piece after the punch. The common impact method is Izod & Charpy.
READ MORE
The clear aligners testing machine is able to adjust the angle and stressed position. To simulate the clear aligner deformation from been stressed partially and under some special environment, it provides a beaker as the test area for user to add factors such as water and so on.
READ MORE
ASTM D1894
This test method covers determination of the static and kinetic coefficient of friction of starting and sliding friction of plastic film, sheeting, rubber, paper, carbon, composite material belt, coating, tires and so on when sliding over itself or other substances at specified test conditions.
READ MORE
ASTM F1306
To test the puncture penetration of the film to analyze the strength and energy at the time of rupture. For this test, the size of the probe and puncture area must be defined.
READ MORE
ASTM B33
Copper wire has several advantages such as high tensile strength, uniform ductility, excellent conductivity, and high stability of quality due to its directional consistency.
READ MORE
ISO-2759, ASTM D3786,ASTM D2210, GB/T 6545, JIS-P8112, JIS-L1018,TAPPI-T403,TAPPI-810,TAPPI-T807
Bursting strength testing is mainly used to test the burst strength of raw paper, corrugated cardboard, leather, fabric... and other materials. .
READ MORE
AATCC127 | ISO 811 | JIS L1092 | GB/T4744 | ISO 1420A | DIN53886 | BS 2823 | EN 1734 | EN 20811
READ MORE
ASTM F1269-13 | IPC TM-650 | MIL-STD-883E | AEC-Q200-006A
Die Shear Testing test is mainly used to measure the conductive adhesive that are used between the die and substrate.
READ MORE
ISO 13934-1
Tensile Fabric Test is conducted on knitted textile fabrics and it not normally applied to gauze fabric nor coated fabrics...
READ MORE
This machine uses the "flat-plate hot press molding" method to form and produce samples of rubber, plastic, metal and other materials, and is widely used in various industries.
READ MORE
Top load testing is commonly used in packaging industry to determine a container's strength and performance by measuring the resistance to deformation, allowing users to evaluate...
READ MORE
In order to produce bottles featuring both convenience and transportation safety, manufacturers must perform more careful and complete tests on the products to control the quality...
READ MORE
ASTM D648 | ISO 75-1
The main purpose of H.D.T. Heat Deflection Tester is to test the resistance of heat of the plastic specimen within in a short period of time...
READ MORE
ASTM D3787 | ASTM D6797
The main purpose of textile puncture testing is to determine the strength of knit textiles...
READ MORE
Tack is the ability of an adhesive that a material adheres to another surface when brought into contact...
READ MORE
ISO 2061 | ASTM D1422
This test machine uses the characteristics of different length of yarn after twisting. The test conforms to ISO 2061,ASTM D1422.
READ MORE
ASTM D5276| GB/T 4857.5| CNS 2999| ISTA-1A| ISTA-2A
The purpose of package drop test is to simulate the falls that a parcel may experience during delivering. Conforming to ASTM D5276，ISTA-1A, ISTA-2A.
READ MORE
ISO 13937-2
The procedures in the test standard determines the tear strength of textile fabrics, which evaluates the durability of the products.
READ MORE
The test specimen is placed on the abrasion tester and under the two abrasive wheels. The grinding wheels are loaded with a specific weight, and rotates at a fixed speed and a specified numbers of revolutions. The wear resistance of the specimen can be observed visually, or quantified by the weight loss/ volume loss/ depth of wear before and after abrasion test.
READ MORE
Quantifying the mechnical properties of springs is a complex job, as the operation and performance of a spring are difficult to capture and to measure precisely.
READ MORE
ASTM D5748
Puncture testing is commonly used for testing the resistance for specimen such as strech wrap film, rubber, and diaphragm plate.
READ MORE
Service
Test Planning, Education Training, Maintenance Service, Calibration & Certification, Custom Service, Update& Upgrade
Specialists would evaluate the preliminary testing result, choosing the best machine for your test planning. We will provide complete solutions which make you free of worrying about the unknown machines.
READ MORE
The professional engineers with rich experience will personally train and provide complete training content. Your operators and developers can learn the technical skills of various material testing machines from novice to expert.
READ MORE
We provides free maintenance during the warranty period to ensure perfect after-sales service. Our ERP warehousing system makes users quickly obtain the required parts for standing maintenance within 10 years after the sale.
READ MORE
Our company received CE certification from TUV. From design to manufacturing, all the products follow the CE standard rules. A high-level calibration is utilized to ensure the accuracy and stability.
READ MORE
The software is self development. R&D team independently develops its own software programs which has high integration capability and scalability to add new analysis items and meet various testing needs.
READ MORE
We can help you update the software and hardware. Old model upgrading is also available, which could improve the efficiency and extend the machine service life.
READ MORE
News
